MEMORY HiLOGGER LR8450-01 (Wireless LAN Model)

LR8450-01 (Wireless LAN model)

1ms Sampling Portable Logger Expandable to 330
Channels with Your Choice of Plug-in or Wireless Input Modules

Exclusive Academic Offer

Hioki Memory HiLoggers are high-speed data loggers for recording multiple channels of voltage, temperature, resistance or humidity signals, some models providing complete isolation between channels and strong noise resistance. The LR8450-01 offers 1ms sampling across up to 330 channels, and can be paired with 10 different types of plug-in or wireless input units. Collect data from wireless modules installed in remote or confined locations via a LAN connection. New input modules measure strain and distortion, ideal for automotive applications involving the evaluation of vehicle components as well as robotic equipment.

Key Features

• Wireless LAN model expandable to 330 ch with wireless and plug-in units
• Record voltage output from pressure and other sensors with 1ms sampling speed
• Directly connect strain gauge and measure signals in as fast as 1ms intervals
• Significantly reduced effects from noise let you safely measure in high voltage and high frequency areas such as around inverter motors
• Avoid wiring issues by minimizing cable length using wireless units
• Monitor data captured remotely on PC with wireless LAN technology

Model No. (Order Code)

LR8450-01 Wireless LAN equipped model, main unit only
The LR8450 and LR8450-01 cannot perform measurement on their own. One or more plug-in modules or wireless modules are required (sold separately).
Note) The LR8450-01 and wireless modules emit radio waves. Use of radio waves is subject to licensing requirements in certain countries. Using it in a country or region other than those indicated may violate the law and may result in legal penalties for the operator.
Note) For the latest information about countries and regions where wireless operation is currently supported, please visit the Hioki website.

Sample output from a variety of sensors, including 1 ms pressure sensors

Measures at a sampling rate of up to 1 ms.
1 ms sampling rate is the best match to measure sensor outputs with a frequency response of under 100 Hz, for example pressure and vibration sensors.

Measure strain with a 1 ms sampling rate

Connect strain gauges directly and measure at a sampling rate of up to 1 ms.
Strain gauges tend to have long, thin wires that are easily broken, but that potential pitfall can be avoided by using wireless units so that wire length is minimized.

Measure temperature near an inverter or battery

Example: strain measurement   Measures at a sampling rate of up to 10 ms.

Make measurements in locations where it would be difficult to route wires

With the LR8450-01 wireless LAN model and a wireless unit, you can streamline setup and minimize wire use by eliminating the need to run multiple long wires from the testing lab.

Observe data from remote locations on a computer

The LR8450-01 wireless LAN model can connect to commercially available access points. By activating the LR8450-01’s station function and connecting to an access point, you can control the logger remotely via its HTTP server and acquire data via its FTP server.